Rental Kikusui TOS9303 AC/DC HiPot Tester with Insulation Resistance and Ground Bond Test

Description

Rental Kikusui TOS9303 Safety Tester

The TOS9300 Series is a high performance electrical safety analyser that complies to a wide range of universal standards. HiPot, Insulation Resistance, Ground Bond, Leakage Current (touch current and protective conductor current) and partial discharge can all be tested. A total of 6 models are available for standard compliance tests in a wide variety of applications including R&D, quality assurance manufacturing lines and laboratory tests. The TOS9300 Series is a high performance electrical safety analyser that complies to a wide range of universal standards. HiPot, Insulation Resistance, Ground Bond, Leakage Current (touch current and protective conductor current) and partial discharge can all be tested. A total of 6 models are available for standard compliance tests in a wide variety of applications including R&D, quality assurance manufacturing lines and laboratory tests.

Features:

• User-friendly 10Key configuration
• Easy firmware updates via USB
• LAN/USB/RS232C Standard Digital Interface
• I/V Monitor Terminal (Analogue Monitor)
• STATUS OUT Connector
• SIGNAL I/O Connector
• High Precision/High Resolution/High Speed
• Programmable detection response speed
• 7.2kV/100W DC HiPot Test
• Positive Electrode/Negative Electrode Insulation Resistance Testing
• Electric Discharge Function
• AC/DC Earth Continuity testing up to 40A
• EARTH FAULT Protection
• Offset Cancel
• Basic memory function
• Calibration deadline notification
• High-voltage scanner (option)

Specification:

• Max output-voltage of AC HiPot testing: 5kV / 100mA(500VA)
• Max output-voltage of DC HiPot testing: 5kV / 20mA, 7.2kV.13.9mA(100W)
• Measurement range insulation resistance testing: 0.001MΩ to 100.0GΩ (DC -25V to -1000V / DC +50V to +7200V)
• Measurement range of ground bond testing: 0.001Ω to 0.600Ω (3.0A to 42.0A)
• Rise-time control / fall-time control function provided
• Output voltage and panel settings are controlled through LAN/USB/RS232C