Graphtec GL100-WL Compact Data Logger with W-LAN

Description

Graphtec GL100-WL Data Logger

The Graptec GL100 is a small, light-weight series of data loggers. Each model can be powered by batteries and/or by an external power source. Measurements can be recorded over a long period of time, depending on the power saving settings. Each model is easy to set-up. Its small size allows measurements to be taken from almost anywhere. Remote control and monitoring is possible using the GL100-WL, with W-LAN. A variety of sensors are available for different types of measurements.

Standard accessories… Quick start guide, CD-ROM (user manual & application software), USB cable (MicroB-A ~0.5m).

Features:

• Small size for user convenience.
• Record data using the internal memory and/or a microSD card. The recorded data can be transferred directly to a computer via USB or via wireless on the GL100-WL model.
• Meets IP54 standards for basic water resistance and dustproofing – Suitable for a wide range of measuring environments.
• Powered by commercial batteries (two AA alkaline batteries) and/or an external power source (N.B. Some sensors have power source restrictions).
• Alarm indication via LED and output terminal.
• LCD for checking condition settings and measurement data.
• Simultaneous measurements of temperature (-20°C to 85°C) and humidity (0% to 100% R.H.) measurements (sensor GS-TH).
• Simultaneous measurements of voltage (20mV to 50V and 1V to 5V), temperature (K and T type thermocouples) and logic/pulse signals (sensor GS-4VT).
• 4-channel thermistor terminal module, connected to the appropriate thermistor sensor, for up to 4-off temperature measurements (-40°C to 105°C and -40°C to 120°C). It can also measure 4-off logic/pulse signals (sensor GS-4TSR).
• Acceleration (2G, 5G and 10G) can be measured in three directions using the 3-axis acceleration / temperature sensor (GS-3AT). Temperature (-10°C to 50°C) can also be measured at the same time with the 3-axis acceleration / temperature sensor’s internal temperature sensor.
• Voltage can be measured for single-phase two-wire systems, single-phase three-wire systems, three-phase three-wire systems, etc. by using the AC current sensor adapter and AC current sensor (GS-DPA-AC and GS-AC**A).
• Illumination (0 to 200,000 lx) and ultra violet rays (0 to 30 mW/cm2) can be measured at the same time using the illumination / ultraviolet sensor module (GS-LXUV).
• CO2 (0ppm to 9999ppm) can be measured using the CO2 sensor (GS-CO2).
• Two sensors can be connected from among the GS-TH, GS-CO2, and GS-LXUV and perform a combined measurement by using the branch adapter.